4 • EN
CHARGING PROGRAMS
Settings are made by pressing the MODE-button. After about two seconds the charger
activates the selected program. The selected program will be restarted next time the
charger is connected.
The table explains the different Charging Programs:
Program
Explanation
NORMAL
Normal battery program
14.4V/15A. Only for lead-acid
batteries.
RECOND
Recond program
15.8V/1.5A
Use Recond to return energy to empty WET and Ca/Ca batteries.
Recond your battery once per year and after deep dischare to maximise
lifetime and capacity. The Recond program adds the Recond step to the
normal battery program. Only for lead-acid batteries.
SUPPLY
Supply program
13.6V/15A
Use as a 12V power supply or use for float maintenance charging when
100% capacity of the battery is required. The Supply program activates
the Float step without time or voltage limitation. The spark protection
on the battery charger is disabled during the SUPPLY program.
BATTERY SIZE (Ah)
TIME TO 80% CHARGED
40Ah
3h
100Ah
6h
200Ah
11h
300Ah
16h
READY TO USE
The table shows the estimated time to charge a battery from empty to 80%
ERROR LAMP
If the error lamp is lit, check the following:
MODE
RECOND
SUPPLY
NORMAL LITHIUM
PRO
25S
1. Is the chargers red clamp connected to the battery's
positive pole? Connect the charger according to the
vehicles manual.
2. Is the charger connected to a 12V battery?
3. Are the terminals short circuited?
4. Has charging been interrupted in
or
?
Restart the charger by pressing the MODE-button. If charging is still
being interrupted, the battery...
...is seriosly sulphated and may need to be replaced.
...can not accept charge and may need to be replaced.
...can not keep charge and may need to be replaced.
POWER LAMP
If the power lamp is lit with a:
MODE
RECOND
SUPPLY
NORMAL LITHIUM
PRO
25S
1. STEADY LIGHT
The mains cable is connected to the wall socket.
2. FLASHING LIGHT:
The charger has entered the energy save mode. This happens if the
charger isn´t connected to the battery within 2 minutes or the battery
voltage is below 2V.
LEAD-ACID
