CTE B-LIFT PRO Series, Инструкция по эксплуатации и техническому обслуживанию, Страница: 95 / 148

I n s t r u c t i o n s f o r U s e
a n d M a i n t e n a n c e
Section F
23
Stabiliser retraction from the basket station (optional)
Instructions on how to use the optional stabiliser
controls at the basket station.
- At the station in the frame, turn the SA2 selector
to its central position to select the basket station.
- The HN5 and HN6 indicator lights at the basket
station turn on.
The HN6 indicator turns off when the stabilisers
leave the ground.
- Turn the SC14 selector to ON, to activate the
stabiliser function.
- Move the SJ1 joystick along the Y axis and
press the manual button to move all four stabilisers
simultaneously.
You can also turn on the SC12 and/or the SC13
selector to move each stabiliser separately.
- If the action does not have any effect, this
means the arms of the lifting platform are not in the
correct position.
- You can retract the cross-beams manually
when the stabilisers are fully retracted.
Disconnect any external auxiliary networks the
platform is connected to (electrical, water or
pneumatic systems, etc.).
ATTENTION
Make sure that when the
outriggers and beams are
completely retracted, the light H3
in the cabin is off.
RETRACT
UM1103_ITA
SC14
SC12 SC13
SJ1
asse y
ON
1
4 2
3
SA2
HN5
HN6
UM1102
EXTENSION