CTE B-LIFT PRO Series, Инструкция по эксплуатации и техническому обслуживанию, Страница: 87 / 148

Instructions for Useand
M a i n t e n a n c e
Section F
15
Stabilising operations
BL
L2 L1 L4 L3
1 2
3 4
SA2 HC3
UM1005
After having assessed the real solidity of the ground
where one must work, it is necessary:
- Turn the selector SA2 to the left position of
stabilisation selection.
- Bring the four outriggers to the ground lowering
their levers
L1, L2, L3 and L4 .
- Having reached the desired position, release the
levers which will automatically return to the centre.
ATTENTION
For correct stabilisation, the vehicle wheels must be lifted from the ground, except
for when the manufacturer of the vehicle has prescribed to work with the wheels on
the ground. This information will be inserted in the document attached to the manual
“Work area machine dimensions”.
- Check that the platform is horizontal, as indicated by the bubble level BL . If necessary, act on the individual
outriggers to reach horizontal positioning.
- The green light will turn on HC3 indicating that the boom can be lifted.
ATTENTION
With outriggers and beams out of position, the light H3 in the cabin should be on