CTE B-LIFT PRO Series, Инструкция по эксплуатации и техническому обслуживанию, Страница: 65 / 148

I n s t r u c t i o n s f o r U s e
a n d M a i n t e n a n c e
Section E 13
The manual emergency pump
PM1
is fitted on the
right side, beside the stabilising controls.
ATTENTION
Only use it when the main pump
is malfunctioning.
It is designed to force manually the circulation of the
hydraulic oil throughout the system.
To do so, insert the handle provided into the purpose
provided slot on the pump and activate it energetically.
ATTENTION
The action will be effective only
after the oil has filled the manual
pump completely.
Manual emergency pump
UM0091
UM0075
L
SAFETY DEVICE FUNCTIONALITY CHECK
- Turn off the vehicle’s motor while keeping the Power take-off activated with the platform in
an elevated position.
- Insert the lever
L L
L L
L
, which is situated underneath the passenger seat in the vehicle cab, into
the pump
PM1 PM1
PM1 PM1
PM1
.
- Activate manually the lever of the manual emergency pump
PM1 PM1
PM1 PM1 PM1
, while at the same time
activating the electrical controls of the control post.
PM1.