Aerial work platform
B-LIFT 18 HV
17
COD. UM0287_GB | REV. 00 | ED: 09/18
Chapter 2
GB
SAFETY
OBLIGATORY
Use only devices that are well kept and in good working order. Moreover, the
devices must be approved and bear the conformity CE-mark. Please refer to
the manual provided by the manufacturer for the use and maintenance of the
devices.
2.7.1.1
Additional personal protective equipment
In addition to the harness system, the use of the aerial work platform foresees the
use of a safety helmet for overhead works with chinstrap (EN 397) and footwear for
professional use (EN 346).
Other equipment may be required depending on the type of job or environment, such as: gloves,
goggles, earmuffs etc. The requirement for and type of PPE must be evaluated by the employer or
site manager.
2.8
Residual risks
Mechanical risks:
•
Risk of crushing feet when stabilising the machine.
•
Risk of crushing limbs by boom joints during the closing process.
The areas of risk are indicated with labels (see Chapter 3).
