8
Aerial work platform
B-LIFT 18 HV
COD. UM0287_GB | REV. 00 | ED: 09/18
GB
Chapter 2
SAFETY
2.3.6
Machine hazards
•
Carry out a thorough pre-start check and test all the functions before each working shift.
•
Mark and immediately remove from service in the event of any malfunctioning controls or faulty
safety devices.
•
Never
use a machine that is damaged or faulty.
•
Never use the machine if there is leakage of hydraulic oil or air. Leakage of hydraulic luid or
air could cause skin damage and burns.
•
Ensure that all maintenance checks have been carried out, as speciied in this manual.
•
Ensure that all the labels are in place and that they are legible.
•
Ensure that the manual is intact, legible and kept in the special container in the cab.
•
The machine is equipped with an internal combustion engine that generates noise, the values
of which are show in Chapter 3.
