4
Aerial work platform
B-LIFT 18 HV
COD. UM0287_GB | REV. 00 | ED: 09/18
GB
Chapter 15
OPTIONAL EQUIPMENT AND ACCESSORIES
15.5
Automatic stabilization
The platform can be equipped with automatic stabilization which involves replacing the hydraulic
distributor with an electro-hydraulic distributor, in a frame, and the assembly in the basket of an electric
control panel (Fig. 15.3). The electro-hydraulic distributor allows the stabilizers to be operated both
by means of levers and by an electric control.
50.2402.330
6
4
2
9
8
5
7
3
1
Fig.
15.3
Item
Description
1
Green light: stabilised;
•
switches on when the stabilisers are on the ground and minimum stabilisation
has been accomplished.
2
Machine motor started button (man present);
•
Keep this button pressed during all outrigger extraction and retraction operations
and all stabiliser raising and lowering operations until the machine is fully
stabilised (green OK light on).
3
Front left outrigger control button
•
by pressing the button, the outrigger
is extended or, in combination with
button (7)
,
retracted.
4
Rear left outrigger control button
5
Front right outrigger control button
6
Back right outrigger control button
7
Stabiliser outrigger retraction enabling button:
•
Keep pressed in combination with buttons (3,4,5,6) to retract the outriggers (the
stabilisers must already be in the rest position).
8
Stabiliser extension button;
•
press to extend all stabilisers
