Aerial work platform
B-LIFT 18 HV
5
COD. UM0287_GB | REV. 00 | ED: 09/18
Chapter 01
GB
GENERAL INFORMATION
This manual may not in any way replace the speciic technical preparation which operators
must have previously undergone on similar machines or else which they must undergo
under the supervision of qualiied personnel.
This manual is written for the persons responsible for performing the following operations on the
machine:
•
Transport and handling
•
Use
•
Adjustments
•
Cleaning
•
Maintenance
•
Demolition and disposal
PROHIBITED
It is prohibited for persons to perform operations or work which falls outside
their speciic areas of expertise and responsibilities.
1.3.7
Conservation
This manual is an integral part of the machine and should be stored with care in the cab
dashboard so it can be readily consulted at any moment.
The manual must always accompany the machine along with the CE declaration of conformity,
the check register and any other documents relating to the machine, including in the event
that it is sold, up until such time as it is removed from service or disposed of.
Make a note of the fabrication number on the cover in order to easily identify the manual.
If the manual is lost or has deteriorated, request a new copy from the manufacturer, quoting
the code on the cover or the machine’s factory number.
PROHIBITED
Do not remove, tear out or make arbitrary modiications to any parts of this
document.
1.3.8
Conidentiality
The technical information (text, drawings and illustrations) contained in this manual are property of
CTE S.p.A.
and should be considered conidential.
It is strictly prohibited to disclose, reproduce or translate this document, in whole or in part, without
written authorisation from
CTE S.p.A.
