70
CHAPTER 3
CLI CONFIGURATION
3.9.15.3 (config)# gvrp time
Syntax:
(config)# gvrp time { [ join-time <jointime> ] [ leave-time <leavetime> ] [ leave-all-time <leavealltime> ] }
Explanation:
Set up the maximum number of VLANs can be learned via GVRP.
Parameters:
[ join-time <jointime> ]: Specify the amount of time in units of centi-seconds that PDUs are transmitted. The
default value is 20 centi-seconds. The valid value is 1
~
20.
[ leave-time <leavetime> ]: Specify the amount of time in units of centi-seconds that the device waits before
deleting the associated etry. The leave time is activated by a “Leave All-time” message sent/received and
cancelled by the Join message. The default value is 60 centi-seconds.
NOTE:
The “LeaveAll-time” parameter must be greater than the “Leave-time” parameter.
[ leave-all-time <leavealltime> ]: Specify the amount of time that “LeaveAll” PDUs are created. A LeaveAll PDU
indicates that all registrations are shortly de-registered. Participants will need to rejoin in order to maintain
registration. The valid value is 1000 to 5000 centi-seconds. The factory default 1000 centi-seconds.
NOTE:
The “LeaveAll-time” parameter must be greater than the “Leave-time” parameter.
Negation:
(config)# no gvrp time { [ join-time <jointime> ] [ leave-time <leavetime> ] [ leave-all-time <leavealltime> ] }
3.9.15.4 (config-if)# gvrp
Syntax:
(config-if)# gvrp
Explanation:
Enable GVRP function on the specified interfaces.
Example:
Enable GVRP function on port 1
~
5.
Negation:
(config-if)# no gvrp
3.9.16 (config)# hostname
Syntax:
(config)# hostname <WORD>
Explanation:
Specify a descriptive name for this switch.
Parameters:
<WORD32>: Specify a descriptive name for this device. Indicate the hostname for this device. Alphabets (A-Z; a-z),
digits (0-9) and minus sign (-) can be used. However, space characters are not allowed. The first character must
# config t
(config)# interface FastEthernet 1/1-5
(config-if)# gvrp
(config-if)#
Содержание IFS-1604GSM Series
Страница 385: ......