172
CHAPTER 3
CLI CONFIGURATION
<engineID>: Indicates the SNMPv3 engine ID. The string must contain an even number (in hexadecimal format)
with number of digits between 10 and 64, but all-zeros and all-'F's are not allowed. Changes to the Engine ID will
clear all original local users.
Negation:
(config)# no snmp-server engined-id local
Show:
# show snmp
3.9.43.7 (config)# snmp-server host
Syntax:
(config)# snmp-server host <conf_name>
Explanation:
Configure SNMP server hostname.
Parameters:
<conf_name: word 32>
:
Specify a host name. Once “Enter” is pressed, the CLI prompt changes to (config-snmps-
host)#.
Example:
Set SNMP server hostname to RemoteSnmp
Negation:
(config)# snmp-server host <conf_name>
Show:
# show snmp host [ <conf_name> ] [ system ] [ switch ] [ power ] [ interface ] [ aaa ]
3.9.43.8 (config)# snmp-server location
Syntax:
(config)# snmp-server location <v_line255>
Parameters:
<v_line255>: Specify the descriptive location of this device. The allowed string length is 0 – 255.
Example:
Set the location to “Cabinet A22”
Negation:
(config)# no snmp-server location
3.9.43.9 (config)# snmp-server security-to-group
Syntax:
(configt)# snmp-server security-to-group model { v1 | v2c | v3 } name <security_name> group <group_name>
Explanation:
Configure SNMPv3 Group settings.
Parameters:
# config t
(config)# snmp-server location Cabinet A22
# config t
(config)# snmp-server host RemoteSnmp
Содержание IFS-1604GSM Series
Страница 385: ......