96
CHAPTER 3
CLI CONFIGURATION
3. 9.20.11 (config-if)# ipv6 mld snooping mrouter
Syntax:
(config-if)# ipv6 mld snooping mrouter
Explanation:
Set this interface to Router port. If IGMP snooping cannot locate the IGMP querier, you can manually
designate a port which is connected to a known IGMP querier (i.e., a multicast router/switch). This interface will then
join all the current multicast groups supported by the attached router/switch to ensure that multicast traffic is passed
to all appropriate interfaces within the switch.
Negation:
(config-if)# no ipv6 mld snooping mrouter
Show:
> show ipv6 mld snooping [ vlan <v_vlan_list> ] [ group-database [ interface ( <port_type>
[ <v_port_type_list> ] ) ] [ sfm-information ] ] [ detail ]
> show ipv6 mld snooping mrouter [ detail ]
# show ipv6 mld snooping [ vlan <v_vlan_list> ] [ group-database [ interface ( <port_type>
[ <v_port_type_list> ] ) ] [ sfm-information ] ] [ detail ]
# show ipv6 mld snooping mrouter [ detail ]
3.9.21 (config)# lacp
3.9.21.1 (config)# lacp system-priority
Syntax:
(configure)# lacp system-priority <v_1_to_65535>
Parameters:
<v_1_to_65535>: The priority of the port. The allowed value range is from 1 to 65535.
Explanation:
Configure system priority for LACP function. The lower number means greater priority. This priority value
controls which ports will be active and which ones will be in a backup role.
Example:
Set LACP system priority value to 100.
Example: Enable IPv6 MLD proxy.
Negation:
(config)# no lacp system-priority <v_1_to_65535>
Show:
# show lacp { internal | statistics | system-id | neighbour }
3.9.21.2 (config-if)# lacp
Syntax:
(config-if)# lacp
Explanation:
Enable LACP on this interface.
Example:
Enable LACP on Fast Ethernet 1.
# config t
(config)# interface FastEthernet 1/1
(config-if)# lacp
(config-if)#
# config t
(config)# lacp system-priority 100
Содержание IFS-1604GSM Series
Страница 385: ......
