61
CHAPTER 3
CLI CONFIGURATION
has effect for successfully authenticated clients on the port and will not cause the clients to get temporarily
unauthorized.
Show:
> show dot1x statistics { eapol | radius | all } [ interface ( <port_type> [ <v_port_type_list> ] ) ]
# show dot1x statistics { eapol | radius | all } [ interface ( <port_type> [ <v_port_type_list> ] ) ]
3.9.9 (config-if)# duplex
Syntax:
(config-if)# duplex { half | full | auto [ half | full ] }
Explanation:
Configure port’s duplex mode.
Parameters:
{ half | full | auto [ half | full ] }: Specify the duplex mode for this specific interface.
Example:
Set port 1’s duplex mode to auto.
Negation:
(config-if)# no duplex
Show:
> show interface ( <port_type> [ <v_port_type_list> ] ) status
# show interface ( <port_type> [ <v_port_type_list> ] ) status
3.9.10 (config)# enable
3.9.10.1 (config)# enable password
Syntax:
(config)# enable password <password>
Explanation:
Configure enable password.
Parameters:
password <password>: Specify the enable mode password.
3.9.10.2 (config)# enable password level
Syntax:
(config)# enable password [level <priv: 1-15>] <password>
Explanation:
Configure enable password and privilege level.
Parameters:
[level <priv: 1-15>]: Specify the privilege level for this password.
# config t
(config)# interface gigabitethernet 1/1-10
(config-if)# duplex auto
Содержание IFS-1604GSM Series
Страница 385: ......
