Chapter 4. Web Configuration & Operation
293
CHAPTER 4
WEB OPERATION & CONFIGURATION
APS Protocol
Enable:
Select the checkbox to enable APS (Automatic Protection Switching) protocol.
Priority:
The priority to be inserted as PCP bits in TAG (if any).
Cast:
Select whether APS PDU transmitted unicast or multicast. The unicast MAC will be taken from the “Unicast
Peer MAC” configuration. Unicast is only valid for L-APS type. The R-APS PDU is always transmistted with
multicast MAC described in G.8032.
Type:
R-APS:
APS PDU is transmitted as R-APS (this is for ERPS).
L-APS:
APS PDU is transmitted as L-APS (this is for ELPS).
Last Octet:
This is the last octet of the transmitted and expected RAPS multi-cast MAC. In G.8031 (03/2010)
a RAPS multi-cast MAC is defined as 01-19-A7-00-00-XX. In current standard the value for this last octet is
'01' and the usage of other values is for further study.
Click the “Fault Management” button.
Loop Back
Enable:
Select the checkbox to enable Loop Back based on transmitting and receiving LBM/LBR PDU. Loop Back is
automatically disabled when all “To Send” LBM PDU has been transmitted.
Dei:
The DEI to be inserted as PCP bits in TAG (if any).
Содержание IFS-1604GSM Series
Страница 385: ......