192
CHAPTER 3
CLI CONFIGURATION
3.9.46.7 (config-if)# switchport hybrid ingress-filtering
Syntax:
(config-if)# switchport hybrid ingress-filtering
Explanation:
Enable ingress filtering function on this specific interface. If Ingress Filtering is enabled and the ingress
port is not a member of a VLAN, the frame from the ingress port is discarded. By default, ingress filtering is disabled.
Negation:
(config-if)# no switchport hybrid ingress-filtering
Show:
# show vlan status
3.9.46.8 (config-if)# switchport hybrid native vlan
Syntax:
(config-if)# switchport hybrid native vlan <pvid>
Explanation:
Configures the VLAN identifier in Hybrid mode for the port. The allowed values are from 1 through 4095.
The default value is 1.
Parameters:
<pvid>: Specify the port VLAN ID for this specific interface.
Negation:
(config-if)# no switchport hybrid native vlan
Show:
# show vlan status
3.9.46.9 (config-if)# switchport hybrid port-type
Syntax:
(config-if)# switchport hybrid port-type { unaware | c-port | s-port | s-custom-port }
Explanation:
Configures the port type in Hybrid mode for the port.
Parameters:
{ unaware | c-port | s-port | s-custom-port }: There are four port types available. Each port type’s ingress and
egress action is described in the following table.
Action
Port Type
Ingress Action
Egress Action
Unaware
When a tagged frame is received on a port,
1.
If the tagged frame with TPID=0x8100, it
becomes a double-tag frame and is
forwarded.
2.
If the TPID of tagged frame is not 0x8100
(ex. 0x88A8), it will be discarded.
The TPID of frame transmitted by
Unaware port will be set to 0x8100.
The final status of the frame after
egressing are also affected by egress
rule.
When an untagged frame is received on a port,
a tag (PVID) is attached and then forwarded.
C-port
When a tagged frame is received on a port,
1.
If a tagged frame with TIPID=0x8100, it is
forwarded.
2.
If the TPID of tagged frame is not 0x8100
The TPID of frame transmitted by C-
port will be set to 0x8100.
Содержание IFS-1604GSM Series
Страница 385: ......
