146
CHAPTER 3
CLI CONFIGURATION
Show:
> show ptp <clockinst> { default | current | parent | time-property | filter | uni | slave | { { port-state | port-ds }
[ interface ( <port_type> [ <v_port_type_list> ] ) ] } }
# show ptp <clockinst> { default | current | parent | time-property | filter | uni | slave | { { port-state | port-ds }
[ interface ( <port_type> [ <v_port_type_list> ] ) ] } }
3.9.36 (config-if)# pvlan
3.9.36.1 (config-if)# pvlan
Syntax:
(config-if)# pvlan <pvlan_list>
Explanation:
This command is used to configure private VLANs. New Private VLANs can be added and existing VLANs
can be modified. Private VLANs are based on the source port mask and there are no connections to VLANs which
means that VLAN IDs and Private VLAN IDs can be identical. A port must be a member of both a VLAN and a Private
VLAN to be able to forward packets. By default, all ports are VLAN unaware and members of VLAN 1 and Private VLAN
1. A VLAN unaware port can only be a member of one VLAN, but it can be a member of multiple Private VLANs.
Parameters:
<pvlan_list>: Specify the private VLAN ID.
Negation:
(config-if)# no pvlan <pvlan_list>
Show:
# show pvlan <pvlan_list>
3.9.36.2 (config-if)# pvlan isolation
Syntax:
(config-if)# pvlan isolation
Explanation:
Enable Port Isolation function on this specific interface. Port Isolation is used to prevent communications
between customer ports in a same Private VLAN. The port that is isolated from others cannot forward any unicast,
multicast or broadcast traffic to any other ports in the same PVLAN.
Negation:
(config-if)# no pvlan isolation
Show:
# show pvlan isolation [ interface ( <port_type> [<plist>] ) ]
3.9.37 (config)# qos
3.9.37.1 (config)# qos map cos-dscp
Syntax:
(config)# qos map cos-dscp <cos> dpl <dpl> dscp { <dscp_num> | { be | af11 | af12 | af13 | af21 | af22 | af23
| af31 | af32 | af33 | af41 | af42 | af43 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | ef | va } }
Parameters:
cos-dscp <cos>: Map COS to DSCP. Indicate the Class of Service level. The allowed range is 0 to 7. A CoS class of 0
has the lowest priority, while 7 has the highest priority.
dpl <dpl>: Specify the Drop Precedence Level. The allowed range is 0 to 7.
Содержание IFS-1604GSM Series
Страница 385: ......
