CTC Union IFS-1604GSM Series, Руководство пользователя

Страница: 144 / 385

144
CHAPTER 3
CLI CONFIGURATION
<delay_asymmetry>:
Specify delay asymmetry value in ns. The valid range is -100000-100000.
Negation: (config-if)# no ptp <clockinst> delay-asymmetry
Show: > show ptp <clockinst> { default | current | parent | time-property | filter | uni | slave | { { port-state | port-ds }
[ interface ( <port_type> [ <v_port_type_list> ] ) ] } }
# show ptp <clockinst> { default | current | parent | time-property | filter | uni | slave | { { port-state | port-ds }
[ interface ( <port_type> [ <v_port_type_list> ] ) ] } }
3.9.35.11 (config-if)# ptp <clockinst> delay-mechanism { e2e | p2p }
Syntax:
(config-if)# ptp <clockinst> delay-mechanism { e2e | p2p }
Explanation: Configure member delay Mechanism for this specific interface.
Parameters:
<clockinst: 0-3>: Specify the instance number.
{ e2e | p2p }: Configure delay mechanism used for the port. This can be defined per port in an Ordinary/Boundary
clock. In a transparent clock, all ports use the same delay mechanism, determined by the clock type.
e2e: End to end delay measurement
p2p: Peer to peer delay measurement.
Negation: (config-if)# no ptp <clockinst> delay-asymmetry
Show: > show ptp <clockinst> { default | current | parent | time-property | filter | uni | slave | { { port-state | port-ds }
[ interface ( <port_type> [ <v_port_type_list> ] ) ] } }
# show ptp <clockinst> { default | current | parent | time-property | filter | uni | slave | { { port-state | port-ds }
[ interface ( <port_type> [ <v_port_type_list> ] ) ] } }
3.9.35.12 (config-if)# ptp <clockinst> delay-req interval <interval>
Syntax:
(config-if)# ptp <clockinst> delay-req interval <interval>
Explanation: Configure the time recommended to the member devices to send delay request messages when the port
is in the master state.
Parameters:
<clockinst: 0-3>: Specify the instance number.
<interval>: Specify delay requestion message interval. The valid range -7 to 5.
Negation: (config-if)# no ptp <clockinst> delay-req interval
Show: > show ptp <clockinst> { default | current | parent | time-property | filter | uni | slave | { { port-state | port-ds }
[ interface ( <port_type> [ <v_port_type_list> ] ) ] } }
# show ptp <clockinst> { default | current | parent | time-property | filter | uni | slave | { { port-state | port-ds }
[ interface ( <port_type> [ <v_port_type_list> ] ) ] } }