CTC Union IFS-1604GSM Series, Руководство пользователя

Страница: 142 / 385

142
CHAPTER 3
CLI CONFIGURATION
3.9.35.6 (config)# ptp <clockinst> time-property
Syntax:
(config)# ptp <clockinst> time-property [ utc-offset <utc_offset> ] [ valid ] [ leap-59 | leap-61 ] [ time-
traceable ] [ freq-traceable ] [ ptptimescale ] [ time-source <time_source> ]
Explanation: This command defines members needed to interpret the time provided in PTP messages. The clock time
properties data set is defined in the IEEE 1588 Standard. The data set is both configurable and dynamic, i.e. the
parameters can be configured for a grandmaster. In a slave clock the parameters are overwritten by the grandmasters
timing properties. The parameters are not used in the current PTP implementation.
Parameters:
<clockinst: 0-3>: Specify the instance number.
[ utc-offset <utc_offset> ]: Specify UTC Offset value. Valid range is -32768 to 32767.
[ valid ]: Specify “valid” to denote UTC Valid is True.
[ leap-59 | leap-61 ]: Specify one of the option.
[ time-traceable ]: Specify this to denote time-traceable “True”.
[ freq-traceable ]: Specify this to denote freq-traceable “True”.
[ ptptimescale ]: Specify this to denote ptptimescale “True”.
[ time-source <time_source> ]: Specify time source value. Valid range is 0 to 255.
Show:
> show ptp <clockinst> { default | current | parent | time-property | filter | uni | slave | { { port-state | port-ds }
[ interface ( <port_type> [ <v_port_type_list> ] ) ] } }
# show ptp <clockinst> { default | current | parent | time-property | filter | uni | slave | { { port-state | port-ds }
[ interface ( <port_type> [ <v_port_type_list> ] ) ] } }
3.9.35.7 (config)# ptp <clockinst> uni
Syntax:
(config)# ptp <clockinst> uni <idx> [ duration <duration> ] <ip>
Explanation: When operating in IPv4 Unicast mode, the slave is configured up to 5 master IP addresses. The slave then
requests Announce messages from all the configured masters. The slave uses the BMC algorithm to select one as
master clock, the slave then request Sync messages from the selected master.
Parameters:
<clockinst: 0-3>: Specify the instance number.
<idx: 0-4>: Specify index number in the Slave table.
[ duration <duration: 10-1000> ]: Specify the number of seconds for which the Announce/Sync messages are
requested.
<ip>: Specify IPv4 address of requested master clock.
Negation:
(config)# no ptp <clockinst> uni <idx>