111
CHAPTER 3
CLI CONFIGURATION
3.9.23.16 (config-if)# lldp receive
Syntax:
(config-if)# lldp receive
Explanation:
The switch will analyze LLDP information received from neighbours.
Negation:
(config-if)# no lldp receive
Show:
> show lldp statistics [ interface ( <port_type> [ <v_port_type_list> ] ) ]
# show lldp statistics [ interface ( <port_type> [ <v_port_type_list> ] ) ]
3.9.23.17 (config-if)# lldp tlv-select
Syntax:
(config-if)# lldp tlv-select { management-address | port-description | system-capabilities | system-description
| system-name }
Explanation:
To configure LLDP-MED TLV attributes for specific interface.
Parameters:
{ management-address | port-description | system-capabilities | system-description | system-name }: Specify a
LLDP TLV attribute. LLDP uses several attributes to discover neighbour devices. These attributes contains type,
length, and value descriptions and are referred to TLVs. Details such as port description, system name, system
description, system capabilities, management address can be sent from this device.
Negation:
(config-if)# no lldp tlv-select { management-address | port-description | system-capabilities | system-
description | system-name }
Show:
> show lldp neighbors [ interface ( <port_type> [ <v_port_type_list> ] ) ]
# show lldp neighbors [ interface ( <port_type> [ <v_port_type_list> ] ) ]
3.9.23.18 (config-if)# lldp transmit
Syntax:
(config-if)# lldp transmit
Explanation:
To configure LLDP Tx only mode for specific interface
Negation:
(config-if)# no lldp transmit
Show:
# show lldp statistics [ interface ( <port_type> [ <v_port_type_list> ] ) ]
3.9.24 (config)# logging
3.9.24.1 (config)# logging on
Syntax:
(config)# logging on
Explanation:
This sets the server mode operation. When the mode of operation is enabled (on), the syslog message
will send out to syslog server (at the server address). The syslog protocol is based on UDP communication and
received on UDP port 514. Syslog server will not send acknowledgments back to the sender since UDP is a
connectionless protocol and it does not provide acknowledgments. The syslog packet will always send out, even if the
syslog server does not exist. When the mode of operation is disabled, no syslog packets are sent out.
Example:
Enable log server operation.
Содержание IFS-1604GSM Series
Страница 385: ......
