CTC Union FRM220-FOM01, Руководство пользователя

Страница: 4 / 8

- 4 -
w w w . C T C U . c o m
LED Indicators
Figure 3. Panel LED indicators of FRM220-FOM01
LED State Status
PWR (Green)
On Unit is powered normally
Off Unit is powered off or bad
FX LINK (Green)
On Optical Fiber Linked
Off Optical Fiber no link
E1 (Green)
On E1 Mode, 75 Ohm
Flash E1 Mode, 120 Ohm
Off T1 Mode, 100 Ohm
E1/T1
LINK
(Green)
On E1/T1 Signal Present
Off E1/T1 LOS
E1/T1
TEST
(Amber)
On E1/T1 Loop Back Test active
Off Normal
LAN
LINK
(Green)
On Ethernet UTP has link
Flash Ethernet UTP has link and traffic
Off No UTP link
LAN
100
(Green)
On Speed is 100M
Off Speed is 10M
- 5 -
w w w . C T C U . c o m
Console Management
When placed in the 1-slot CH01M chassis, this card can be locally managed by
connecting a simple serial terminal such as a notebook computer that has an
RS232 port or via a commonly available USB to RS232 adapter. In Windows XP,
HyperTerminal™ is an application available for emulating a serial terminal. You
can also search for TeraTerm or PuTTY which are free alternatives, especially if
the operating system is Vista or Win7. FOM01 with CH01M uses the DB9 serial
connector labeled “CONSOLE” and a DB9M to DB9F one-to-one cable to
connect to the PC COM port. Connect the DB9F labeled “CONSOLE” to the
COM port of the management PC. When placed in CH02M chassis, connect
console to CH02M’s DB9F and slide the switch to the right slot number.
Settings
Baud Rate: 38,400
Data bits: 8
Parity bits: none
Stop bits: 1
Flow Control: none
Emulation: VT-100
Connect the serial cable directly to CH01M's DB9F. Run the terminal
emulation program. With power on, press [ESC] or [Enter] to display the
"Main Menu" screen. The following is an example.
Example of Main Menu Console Screen, FRM220-FOM01
Notice: All of these settings are ignored if the card is placed in FRM220-
CH20 with NMC/SNMP management. The card will follow the settings done
via the chassis management. (Refer to NMC operation manual for details
on managing all cards.)
****************************************
*** CTC UNION TECHNOLOGIES CO.,LTD ***
*** FRM220-FOM01 Manager Ver:1.00 ***
****************************************
[Local ] Version:[1.000-1.000-0.000-1.200] [ FOM01-SFP ] [CH01M]
<1> Device Service [ On ]
<2> Fiber Status and Configuration
<3> E1/T1 Status and Configuration
<4> LAN Status and Configuration
<5> Store Configuration
<6> Default Configuration
<P> Setting Password
<T> Switch To Remote Menu [ Absent ]
Please select an item.