LED Indicators
LED
Function
State
Status
Power indicatorOn
Fiber link
Link Loss Forwarding
Mode display
Mode display
Ethernet link
On
Off
On
Off
Blinking
On
Off
Yellow
Green
Off
On
Off
On
Off
Blinking
Converter has power.
Converter has no power.
The fiber link is ok.
No link or the link is faulty.
Receiving data on the fiber.
Link loss forwarding function enable.
Link loss forwarding function disable.
Force the LAN speed in 1000Base.
Force the LAN speed in 100Base.
Force the LAN speed in 10Base.
Full duplex mode.
Half duplex mode.
The UTP link is ok.
No link or the link is faulty.
Receiving data on Ethernet.
PWR
FX
LLF
Speed
Full
TX
Speed
PWR
FULL
LLF
TX
FX
Installation Instructions
FIB1-1000ES 10/100/1000BASE-T
to 1000BASE-X
Managed Fiber Media Converter
Description
The Fiber Transceiver Converter Series gives you the option to choose from most popular fiber cabling
connectors. The
FIB1-1000ES
provides you with two versions which support SFP socket with LC type
connectors for your fiber optic cables and an RJ-45 connector for 10/100/1000Base-T twisted pair
cable connection. For the UTP side, auto-negotiation is default. These units will automatically tailor
themselves to 10/100/1000Base-T and both half-duplex or full-duplex signals depending on your
specific network needs. FX side is fixed in full-duplex only. The Fiber Transceiver Converters give you
the freedom to extend your 1000Mbps cabling distance by allowing connectivity up to 0.5Km in
multi-mode or 80Km in single mode. Six LED indicators signal the power status of the converter,
UTP port, speed, Link/RX, status of duplex, fiber port Link/RX and LLF (Link-Loss Forwarding).
V.: 1.1
Specifications
Standard
IEEE802.3 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X,
Gigabit Standards. Supports Full Duplex Ethernet mode (2000Mbps)
10/100/1000BASE-T RJ-45 Connectors
One RJ-45 connector is provided for connection to either MDI-X (To PC) or MDI (To HUB) equipment.
Utilizing Auto MDI/MDIX allows all UTP connections to be made using only a common straight-through
UTP cable.
568-A type
568-B type
RJ-45 Pin
1000BASE-T UTP Cable
Cable type: 1000Base-T; 4 pair , Cat. 5,
EIA/TIA-568, STP/UTP
Maximum cable distance: 100 meters
(328 feet)
Fiber Optic Connectors
SFP socket with LC is provided
Environment
Temperature : 0°C – 50°C
Humidity: 10-90% non condensing
Dimension
122.6mm x 85.6mm x 20mm
( W x D x H )
Power
AC a12V / 1A
5
Pair1-Tip
Pair1-Tip
4
Pari1-Ring
Pair1-Ring
3
Pair2-Tip
Pair3-Tip
6
Pair2-Ring
Pair3-Ring
1
Pair3-Tip
Pair2-Tip
2
Pair3-Ring-
Pair2-Ring
7
Pair4-Tip
Pair4-Tip
8
Pair4-Ring
Pair4-Ring
Fiber
Connections
Ethernet
Connections
LEDs
DC Jack
DIP
Switches
Jumpers Setting (on PCB)
LLF Function : On means enable, off means disable the function of LLF
( Link Loss Forwarding Function, detail please check Page2 )
ON
OFF
DIP Switch Setting
Sw1~Sw3
Sw4
DIP
UTP Mode
Loop Back Test(LBT)
Function
UTP/NWAY
1000/Full
100/Full
100/Half
10/Full
10/Half
LBT off
LBT on
Status
Off Off Off
On Off Off
Off On Off
Off On On
On On Off
On On On
Off
On
State