CTC Parker Automation PowerStation P1, Руководство пользователя, Страница: 48 / 86

Selecting a Location
40
P1 PowerStation User Guide
Selecting a Location
The first step to installing the PowerStation is to select an appropriate loca-
tion for the unit. This is the most important aspect of the installation
process because the location you select can affect the PowerStation’s
performance, ease-of-use, life-expectancy, and more. This section
provides some guidelines that you should follow when selecting a location
for the PowerStation.
Environmental Guidelines
Environmental guidelines refer to the area where the PowerStation will be
operated. In general, you should select a place that limits the unit’s expo-
sure to adverse conditions such as dust, oil, moisture, and corrosive vapors.
Faceplate considerations
The PowerStation’s faceplate is designed to the NEMA 4 (IP65 European
standard) rating. You should mount the PowerStation in a similar enclo-
sure to provide further protection.
The PowerStation’s faceplate is also resistant to a variety of chemicals.
Refer to the list on page 22 to ensure that the PowerStation’s faceplate is
only exposed to chemicals that appear on this list.
Electrical Guidelines
To minimize unwanted electrical interference, select a location away from
machinery that produces intense electrical noise. If this cannot be avoided,
isolate input power to the unit, and separate all data communication cables
used with the unit from AC power lines.
Field terminal wiring requirements
In order to comply with UL 508 and 1604 requirements, use 60/75
o
C wire
insulation and terminal tightening of 7lb-in. (0.79 N-m) when connecting
field terminal wiring to the PowerStation.
StockCheck.com