Refer to a qualified service personnel for the following concerns:
(1) The USB cable is damaged.
(2) The device has been exposed to rain, water or other liquids.
(3) The device does not properly function after following the instructions in the
User Manual.
Troubleshooting:
If the Bluetooth Speak Stand for Tablets doesn't work properly, please force
shutdown by switching power supply to USB Mode and rebooting it again. If the
Bluetooth Speaker Stand for Tablets doesn't work properly after 3 tries, please
consult your dealer.
Connecting Tablet to the Bluetooth Speakers
1) Press and hold the play/pause button until the stand beeps and the blue indicator light
begins to rapidly flash. Previously paired devices, will automatically pair in 30 seconds.
2) While the blue indicator light is flashing, view the accessible devices available in your tablet
or mobile device's Bluetooth settings. The Bluetooth Speaker Stand for Tablets will show as
"
CTA PAD-BSS
" and click to connect.
3) When successfully connected, the flashing of the blue indicator light will slow down. When
disconnected for 5 minutes, it will automatically shut down.
Using the Bluetooth Speaker Stand for Tablets
1) Short press the V+ and V- to adjust the volume. The speakers will beep at their maximum
and minimum volume levels. If the sound is too low or too high, try adjusting the volume on
your tablet or mobile device.
2) When the battery is low, the speakers will beep. When the battery falls below 3V, the
Bluetooth Speaker Stand for Tablets will automatically shut down.
3) While charging, the red indicator light will turn on. When finished charging, the red
indicator light will turn off.
4) To shut down, press and hold the play/pause button.
Precaution: The power switch should be switched from battery power to USB Mode when the
Bluetooth Speaker Stand for Tablets isn't being used for long periods of time.
PAD-BSS
Bluetooth Speaker Stand
for Tablets
