Medical Rolling Cart with Articulating Arm
and Storage for Laptops
LT-MCRFS
INSTRUCTION - MANUAL
CONTENTS:
INSTALLATION:
888-733-4448
x1
x1
x1
x1
x5
B
C
D
E
F
A
x1
x1
G
1A. Take one wheel (G) and align it to
the leg arm holes on the underneath of
the base (A). Initially you can use your
hands and manually rotate the wheel
until slightly tightened. Then use the
provided wrench tool (B) at the hex
shaped area and rotate it securely to
tighten the rest of the way.
A
G
B
D
A
C
F
2A. Align the bottom of pole
body (D) to the top center of
the base (A). While pieces
are connected, securely flip
over so you can see the
bottom. Align washer (C) to
the hole on the bottom.
Using your hands, identify
L-shaped component (F)
and rotate through the
washer into the hole until
securely tightened. Pole
body and base should now
be securely attached to
each other.
1B. Press the wheel lever up or down to
place wheels in locked or unlocked mode
depending if you want to be in a mobile or
stationary setup. Make sure you adjust all
wheels at the same time or it won’t properly
be set up.
1. Attaching Wheels to Heavy Duty Base
2. Attaching Base to Body
3. Cable Routing through Body
1. Set the pole to the lowest position. Insert cable head through the bottom opening of pole and push upward.
2. Fish the cable to the opening at the top and take cable end and pull out of opening.
3. Carefully pull the cable out and connect end to device.
x1
x2
x2
x1
x2
H
I
J
K
L
M
x1
N
x1
O
x1
x1
P
Q
x1
R
x2
S
x4
T
U
x4
x1
M6 MM
Screw
M6 MM
Hex Nut
M6
Allen Key
**COMPONENTS ARE NOT TO SCALE
AND JUST GRAPHIC REPRESENTATIONS
D
M5x12
Screw
M8 MM
Washer
M8 MM
Bolt
M5
Hex Nut
M5
Screws
M6
Washer
V
x1
