HV DTemp Measurement System
User Guide
7
Version 01.00 // 2021
Measurement module type
STG
Measurement module for the acquisition of mechanical strain using
ST
rain
G
auges
TH
TH
ermo measurement module for temperature measurements with
type K, J or T thermocouples
Bus system
CAN
CAN
bus measurement module
ECAT
E
ther
CAT
® measurement module
Housing type
MM
M
ini
M
odule
TBM
T
est
B
ench
M
odule
Tab. 1-7: Abbreviations for module designations
Typology
As for newer measurement modules, the designation of a module series uses the following
pattern:
f
It starts with the abbreviation
HV
if it is a high-voltage measurement module
f
Indicator for the module type (e.g.
TH
for thermo measurement module).
f
A number indicating the amount of measurement channels
f
Bus system
CAN
or
ECAT
f
Housing type
MM
or
TBM
Example
f
HV AD4 ECAT MM
Series: High-voltage ECAT measurement modules in MiniModule housings
for measuring analog voltages.
f
HV AD CAN TBM
Series: High-voltage CAN measurement modules in 19 inch test bench
housings for measuring analog voltages.
Examples for the designation of older measurement modules
f
ECAT STGMM 6
: ECAT measurement module for measurements with strain gauges with six
measurement channels in a MiniModule housing.
f
HV TH-TBM 8
: High-voltage measurement module for temperature measurements with
eight channels in a test bench housing.
f
THMM 8 pro
: Thermo measurement module with eight measurement channels in a
MiniModule housing. The abbreviation "pro" is for the module version "Professional".
If the module name contains no reference to the bus system, it is usually a CAN measure-
ment module.
Where applicable, further product characteristics are indicated in the name of the indivi-
dual module types (measurement range, sensor supply, measurement data rate).
→ Further information can be found on the CSM website in the "
section.
