Instruments decription
VA 525 EN V1.01
Page 6 of 41
3
Instruments description
The newly developed VA 525 combines modern digital interfaces for connection to energy
monitoring systems with a small, compact design. The VA 525 is always used when many
machines (compressed air consumers) are to be connected/integrated to a energy
monitoring network.
Special features
:
Compact, small design - for use in machines, behind the maintenance unit on the
final consumers
Screw-in thread for easy installation in existing pipelines due to integrated measuring
block
-
Sizes : ¼", ½" ¾", 1" 1 ¼" , 1 ½" and 2"
Integrated flow straighteners (no inlet runs necessary)
Integrated display with presentation of 2 values
-
Flow & Consumption,
-
Speed & Temperature
Operation via integrated keyboard
-
Units selection
freely selectable. m³/h, m³/min, l/min, l/s, kg/h, kg/min, g/s, lb/min, lb/h
Cfm, m/s,ft/min
Digital interfaces
-
Modbus RTU (RS485)
-
Ethernet
-
MBus
Analog interfaces
-
4..20mA
-
Pulse output galv. insulated.
Pressure measurement (optional)
Noze The optional CS Instruments Service Software enables you to:
Selection/conversion of gas type (air, nitrogen, argon, nitrous oxide, CO2, oxygen)
Calibration Analog output 4..20mA
Read out service data
sensor diagnosis
