CS Instruments PI 500, Инструкция по установке и эксплуатации

Страница: 73 / 93

Channels
PI 500 Seite 73 von 93
7.3.2.4 Channels
Main menu

Channels
0.000 m³/h
648195 m³
0.000 m/s
Main menu

Channels

C1
Flw 1165.200 m³/h
Con 27366 m³
Vel 180.000 m/s
7.3.2.4.1 Min/Max Function
This feature allows to read out the minimum or maximum values of the current measurement for each
connected sensor. Start of recording is immediately after setting of the sensor, but there is always the
possibility to reset the Min and Max values.
Main menu

Channels

I1

↑
= Max-Wert
↓
= Min-Wert
The overview of Channels shows the current
measured values of all connected sensors.
Exceeds or falls below the set alarm limits, the
respective measured value flashes yellow
(
alarm 1 ) or red ( alarm 2 ).
.
Each channel can be selected and the settings
viewed and checked, but
no changes can be
made here.
Remark:
Please, make changes in the Settings !