CS Instruments PI 500, Инструкция по установке и эксплуатации

Страница: 43 / 93

Sensor-settings
PI 500 Seite 43 von 93
7.3.2.1.2.9.8 Settings Pulse / Alarm output of VA 5xx
Main menu

Settings

Sensor settings

C1

More-Settings

Pulse / Alarm
Main menu

Settings

Sensor settings

C1

More-Settings

Pulse
Main menu

Settings

Sensor settings

C1

More-Settings

Alarm
The pulse output of the VA 5xx could be set
functionally as pulse output or alarm output.
Function to activate by pressing either the
“Pulse”
or
“Alarm”
button.
In case of no use, please select
“none”
.
Inputs / changes to be confirmed with
“OK”
button. Return to main menu with
“Back”.
To set up the pulse first the unit and the
measurement value have to be defined.
Unit selection by pressing
“unit”
button and
choice one of the possible units
“kg”, “cf”, “ltr”
or
“m³”
).
Pulse weight setting by entering the text field
“Value”
.
Here with defined 1 pulse per m³ and with
positive polarity.
With
„Polarity“
the switching state could be
defined.
Pos. = 0
à
1 neg. 1
à
0
pos
neg
open
closed
Inputs / changes to be confirmed with
“OK”
button. Return to main menu with
“Back”.
In case of use the pulse output as alarm
following definitions needs to be set:
Unit selection by pressing
“unit”
button and
choice one of the possible units
“cfm”, “ltr/s”,
“m³/h”
,
“m/s” ”
,
“°F ”
,
“°C” ”
,
“kg/s” or ”
,
“kg/min”
).
Alarm value setting by entering the text fields
“Value”
.
The limits
„High “ or „Low“
defines when the
alarm is activated, selecting by pressing the
appropriate button
High: Value over limit
Low: Value under limit
Inputs / changes to be confirmed with
“OK”
button. Return to main menu with
“Back”.