CS Instruments PI 500, Инструкция по установке и эксплуатации

Страница: 34 / 93

Sensor-settings
PI 500 Seite 34 von 93
7.3.2.1.2.8.1 Settings Dew point sensor FA 500 FA 510
7.3.2.1.2.8.1.1 Unit selection for temperature and humidity
Main menu

Settings

Sensor settings

C1

arrow right (2.page)
7.3.2.1.2.8.1.2 Definition of the System pressure (relative pressure value)
Main menu

Settings

Sensor settings

C1

arrow right (2.page)

Pressure Setting

Fixed
The definition of the fixed value system pressure
value is done by activating the button
"fixed ", but
this is only required in case a ext. pressure
probe is connected.
The value is entered in the corresponding text
field. The unit can be freely selected, selection
menu is opened by pressing the corresponding
button units
Confirm the settings by pressing the OK button.
Unit selection for temperature and humidity by
pressing the button
°C, °F, g/m³ or mg/m³.
Confirm the settings by pressing the OK button .