Sensor-Settings
– Naming of measurement data
PI 500
Seite
26
von
93
7.3.2.1.2.2 Name the measurement data and define the decimal places
Remark:
The
Resolution
of the decimal places, the
Short Name
and
Value Name
are found under the
Tool
button
!
Tool Button:
Main menu
Settings
Sensor settings
C1
Tool Button
°C
See chapter
7.3.2.1.2.7 label and setting the description fields
7.3.2.1.2.3 Recording measurement data
Main menu
Settings
Sensor settings
C1
Record Button
0.000 ltr/ min
2345678 ltr
0.00 m/s
Attention:
Before the selected measurement data are recorded, the data logger must be activated after the
settings
7.3.2.1.3.2 Logger-Settings(Datalogger)
.
For the recorded
Value
there can be
entered a
Name
with 10 characters and
later in menu item
Graphics/Real time
values
it is easier to identify it.
Otherwise the
Name
is, for example,
C1b
.
The channel name is
C1
and
a
is the first
measurement data at the channel,
the Second
b
and the Third
c
.
The
Resolution
of the decimal places is
simply adjustable by pushing right and left
(0 to 5 decimal places).
Use the
Record
buttons to select the
measurement data that will be stored by
activated data logger
.
Содержание PI 500
