Crystal Vision
Control and Status monitoring
Take
Make all pre-selected crosspoints in one go.
Present On if audio channel is present.
Discrete output router
Select the channels that will be output as AES or analogue signals. This menu
is only available when a DIOP4 or 3G-AOP2 piggyback is fitted. The number of
output channels available for routing will depend on the number and type of
piggybacks fitted. The screen grab below shows a single DIOP4 piggyback in
the front position configured as all outputs.
AES Op
Channels
Display current selections as green circles
and pre-selected crosspoints as red circles.
Preselected crosspoints will be routed when
the ‘Take’ button is pressed. The inputs are
shown along the top of the matrix and are
available to be routed to the AES output
channels shown on the left hand side. The
screen grab above has a DIOP4 piggyback
fitted in the front position configured as all
outputs (C1-8).
Clicking on the intersection of the input and
output will show a red circle which will
change green when the ‘Take’ control is
selected. All crosspoints can be pre-selected.
The screen grab above shows de-embedded
inputs 2-8 preselected to front DIOP4
channels C2-C8.
TANDEM10-VF User Manual R1.0
25
26 June 2017
