Crystal Vision Indigo ViViD 3G Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 47

Crystal Vision Indigo ViViD 3G Скачать руководство пользователя страница 20

Crystal Vision

Control and Status Monitoring

ViViD 3G Video Status sub-menu

Press ENTER to select the Video Status menu or SCROLL to display other sub-menus. See
description of menu structure below for list of sub-menus.

Control Panel keys overview

The functions assigned to the control panel keys are:

•

DEVICE – enters ‘device’ menu to select a card or show available cards.

•

ASTERISK (*) – selects ‘network configuration’ menu.

•

F1 to F4 – soft keys not currently used by ViViD 3G.

•

HOME – returns to top of ViViD 3G’s menu structure.

•

ENTER – accepts current selection.

•

Up arrow – used to move up through the menu structure.

•

Rotary control – shaft encoder used to select sub-menus or variable data.

Updating the display

The values displayed on an active front panel are only updated when an adjustment is made
and when changing menu level. If changes occur through the use of card edge controls or
other remote control, the text displayed on the active front panel will not be updated
immediately. If necessary, use the upward arrow to leave and then re-enter a menu to update
the display.

Menu Structure

The basic menu structure for card edge, front panel access and VisionWeb is
identical and consists of the following menus and sub-menus.

Status

Video Status

Input Video

Input Present

Input Standard

Input Black

Input Frozen

Reference (3GS
and 3GS-20
models only)

ViViD 3G User Manual R1.4

19

19 January 2021

«
...
18
19
20
21
22
...
»

Содержание Indigo ViViD 3G
















































Отзывы:

Нет отзывов