Crystal Vision
Appendix A
12 Appendix A
Statesman
In March 2015, Statesman control of the Q-Down 3G range was superseded by
VisionWeb control. Statesman is no longer supported after this date, but information
for existing users is included in this appendix. The following is an extract from a
previous version of the Q-Down-ATG 3G manual:
The Crystal Vision Statesman PC control software is designed to control a range of
Crystal Vision modules via Ethernet control from a PC. Statesman provides a user
friendly means of configuring and operating Crystal Vision modules with the benefit of
“see-at-a-glance” status monitoring. The main Statesman application communicates
with each module in a frame through a Statesman-capable front panel CPU or full
active control panel. Either of these must be fitted to the frame to allow Statesman
control.
12.1 Statesman operation
The initial view will show an Explorer style view of the connected frames and
modules. Double clicking on a module will enable the display of the main application
menus.
Statesman main application window
The two large control panes shown in the upper and lower halves of the window may
display different menus for the same card, or controls for different cards. Click on the
horizontal button-bar between the two panes to close the lower pane or drag the
button to vary the size of the panes.
Note:
For further details of Statesman configuration and operation please
refer to the Statesman manual.
Q-Down-AG 3G/ATG 3G User Manual R2.1
50
11 July 2019
