Crystal Vision
Appendix 1
Channel Gain
Select Channels
Select the audio group of four to apply the gain controls to.
Gain 1-4
Use these controls to set the audio gain by +/- 18dB individually for each of the
four channels of the group. Select the group first and then adjust the gain. Gain
control is prior to the audio output router and can be applied to all available
sources.
Cal audio Gain
Select to return all channels to the calibrated gain level.
N.B. To set the gain in Statesman, first select the audio group, adjust the gain
for the individual channels within the group and press ‘ENTER’ on the keyboard
to store.
AES input channels C1-C8 corresponds to rear module stereo pairs AES 1-4.
ADP 310 User Manual R1.2
40
19 June 2019
