Crystal Vision
Virtual Cards
The new control id 11 is created and then re-directed to slot 6 control 29. The new control has
been included as the only control in the group ‘Synner310’.
Repeat this process for as many controls as required, nesting the controls to be within the
correct groups.
Check the edited file against the XML schema
If you are using a dedicated XML editor, it should be able to check the XML file for validity
against the Crystal Vision schema file (CrystalVision.xsd). The preferred 'Oxygen' XML editor
does this automatically. The schema file is included with the XML files download from the
Registered Area on the Crystal Vision website.
Transfer the file to the frame
Once you have got the controls you want you need to transfer the xml file to the
/virtualcard
directory in the frame. Follow the instructions in section
Then reboot the frame. The virtual card will then be available in its new virtual slot to be
accessed by VisionWeb, VisionPanel or by the Indigo 2AE active front panels:
Indigo 2AE and 2SE User Manual R1.17
45
27 February 2020
