Crystal Vision
Statesman
7 Statesman
7.1 Statesman introduction
The Crystal Vision Statesman PC control software is designed to control a range of
Crystal Vision modules via serial control from a PC. Statesman provides a user
friendly means of configuring and operating Crystal Vision modules with the benefit of
'see-at-a-glance' status monitoring.
The main Statesman application communicates with each module in a frame through
a Statesman capable or active control panel.
7.2 Statesman operation
The initial view will show an Explorer style view of the connected frames and
modules. Double clicking on a module will enable the display of the main application
menus.
Statesman main application window
The two large control panes shown in the upper and lower halves of the window may
display different menus for the same card, or controls for different cards. Click on the
horizontal button-bar between the two panes to close the lower pane or drag the
button to vary the size of the panes.
Note: For further details of Statesman configuration and operation please refer to
the Statesman manual.
3GDA204R/210R User Manual R1.1
15
12 July 2017
