7 - 4
10. Remove the two silicon faucet seals from the inlet end (Figure 7-21) and unscrew the faucet cap by
rotating it counterclockwise to separate the top and bottom halves of the faucet assembly (Figure 7-22 and
7-23).
11. Using only FDA approved sanitizing products, thoroughly clean all water contact parts and drip tray.
The use of these products must be in accordance with the manufacturer’s safety instructions and recom-
mendations and performed by properly trained personnel.
12. Remove front bottom panel by removing screw and set aside (Figure 7-24 and 7-25). Remove both
side panels by removing the 4 screws (Figure 7-26 and 7-27) and open top cover to lift panels off locator
pins (Fig 7-28 to 7-30). Clean all 3 panels using only a mild non-abrasive cleaning agent. The use of bleach
or abrasive cleaners is not recommended.
Figure 7-21 Figure 7-22 Figure 7-23
Figure 7-24 Figure 7-25 Figure 7-26 Figure 7-27
Figure 7-28 Figure 7-29 Figure 7-30
