6
PLASTICIZER WARNING
CAUTION:
To prevent Plasticizers from migrating to the finish of
the counter top or table top or other furniture, place NON-PLASTIC
coasters or place mats between the appliance and the finish of the
counter top or table top. Failure to do so may cause the finish to
darken; permanent blemishes may occur or stains can appear.
ELECTRIC POWER
If the electrical circuit is overloaded with other appliances,
your appliance may not operate properly. It should be operated
on a separate electrical circuit from other appliances.
Life is Busy
Keep it simple in the kitchen with CRUX. Committed to efficiency, ease of use, and sleek
design, our entire line of appliances was developed to make your life simpler. High quality
products that get the job done, all while looking great on your countertop. It’s never been
easier to cook, host, or take on culinary adventures.
When your stovetop isn’t cutting it, reach for the CRUX 6QT Extra Deep Electric Skillet.
Offering a 1300-watt heating system and 50% more space than traditional skillets, it’s ideal
for preparing large meals for the family, team, and beyond.
Simmer, fry, or braise on the 12” x 12” cooking surface. Coated with Copper Titanium
Ceramic, this state-of-the-art technology offers a healthy, eco-friendly surface with
outstanding strength. Ten times more durable and scratch resistant than traditional skillets,
it also cooks up to 30% faster. Thick, die-cast sides are 3” high, reducing spills and adding
cooking volume.
From eggs to pasta to fish, the CRUX 6QT Extra Deep Electric Skillet tackles it all. An
easily adjustable temperature dial offers a quick preheat for deep frying at 400°F, or a
slow simmer on low. The tempered glass lid provides clear visibility while cooking without
disrupting the heating process. Because sometimes, more is more. This is one of those times.
For when food is a family affair.
14620_crux_Deep 12x12 copper ti Skillet_Macys_IM R3.indd 6
14620_crux_Deep 12x12 copper ti Skillet_Macys_IM R3.indd 6
2020-11-17 10:44 AM
2020-11-17 10:44 AM
