Receiver Wiring Adaptor Connections
120 70-1770
Page 3
STEP 2 --
CONTINUED
A.
Strip wires back 1/2”.
B.
Twist wires together and
insert in crimp cap.
C.
Squeeze middle of cap
for tight connection.
Copyright 2014 Crutchfield Corporation
STEP 3 -- APPLICATION
When ready to install the receiver, plug
the Wiring Adaptor from the new receiver
or receiver assembly into the factory
radio harness(es) in the vehicle dash.
D.
Complete crimp connections
for all necessary wires.
E.
Be sure to wrap any wires from
the Wiring Adaptor that are
not necessary (wires with no
match from the new receiver)
with
electrical
tape.
STEP 2 -- CRIMP CONNECTIONS
Tools & Parts
Required
Wire Stripper/Crimp Tool
Crimp Caps
Unused Wire (tape over bare wires)
Receiver Wiring Adaptor
Generic Illustration
Generic Illustration