14
Copyright 2018 Crutchfield Corporation
1-800-955-9094
TECHNICAL SUPPORT
019 0021
Wire Splicing Guide
(continued)
Wire Color
Wire Location
Left front door speaker
positive (+): white or green, negative (-): white/brown or gray
Left front mid/tweeter (with amplifier)
positive (+): green/blue, negative (-): gray/blue
Right front door speaker
positive (+): white/violet or violet, negative (-): white/orange or yellow
Right front mid/tweeter (with amplifier) positive (+): violet/gray, negative (-): yellow/gray
Center dash speaker
positive (+): green, negative (-): gray/yellow
Left rear door speaker
positive (+): white/green or green/white negative (-): brown or brown/yellow
Right rear door speaker
positive (+): brown/white or violet/white, negative (-): brown/blue or blue
Trunk subwoofer voice coil #1
positive (+): blue, negative (-): blue/white
Trunk subwoofer voice coil #2
positive (+): red, negative (-): red/white
Vehicle speed sense
1
(2.3L engine) PCM
2
, 95-pin plug, pin 12 or 26 - brown/green
(3.7L or 5.0L engine) - PCM
2
, 95-pin plug, pin 12 or 26 - yellow/orange
Reverse (+)
1
BCM
3
, 36-pin plug (J3), pin 11 - green/brown
Parking brake
1
Parking brake switch or BCM
3
, blue 52-pin plug (J5), pin 47 - white/violet
Foot brake
Brake switch or BCM
3
, black 22-pin plug (J1), pin 1 - violet/white
Notes:
• If equipped with a factory amplifier, the amplifier will be located above the driver’s kick panel.
• ¹The radio replacement interface will also provide these signals.
• ²PCM (Power Control Module) is located under the hood next to the fuse box.
• ³BCM (Body Control Module) is located in the passenger’s kick panel.
NOTE: In most cases a speaker wiring adaptor is available from Crutchfield and splicing will
not be necessary. If no adaptor is available, use this chart as a guide to match and splice wires.
