Tools Needed:
(depending upon vehicle)
000AMPIG
Revision 3/14/05
▲
*000AMPIG*
®
Copyright 2005 Crutchfield Corporation
Amplifier Installation Guide
Flat Blade
Screwdriver
Phillips
Screwdriver
Panel Tool
Pliers
Drill &
Bit Set
Utility Knife
Wire Stripper/
Crimp Tool
A note about wiring:
In addition to the tools listed, your amp
installation will require power and ground wiring, plus RCA
cables, terminals, and a remote turn-on lead. The easiest way
to get all of these items is in an amplifier wiring kit, available
at crutchfield.com.
Soldering
Iron
Heat
Shrink Tubing
Electrical Tape
Heat Gun
Socket &
Ratchet Set
IMPORTANT
Before starting, compare items on your invoice with items received. Carefully check through packaging material. If
any item is missing, please call:
Crutchfield Customer Service at 1-800-955-9091
Although reasonable attempts are made to verify the accuracy of the information
contained in this guide, it is presented without warranties or guarantees of any
type due to the constantly changing nature of this type of information and running
changes in vehicle production. Any person or entity using this information does so
at his or its own risk. If you find that our instructions do not apply to your vehicle,
or if you have questions, do not continue with your installation. Contact our toll-free
technical support for assistance (Tech support phone number is on your invoice).
As with any car audio/video installation, your first
step is to disconnect the negative terminal of your
car battery to prevent short circuits. Check your Crutchfield
MasterSheet™ (available for most vehicles) or vehicle owner’s
manual for specific directions. In some vehicles, disconnecting
the battery may require you to re-enter a security code or have
the dealer reset the internal computer.
!
