Protecting Your
Digital Assets
™
Protecting Your
Digital Assets
™
Ditto
®
Expansion Module
Quick Start Guide
Model covered: USB 3.0 Expansion Module
• Quickly connects and starts working without software
configuration
• Adds USB 3.0 functionality to Ditto Forensic FieldStation
• USB 3.0 provides up to 5 Gbps write-blocked access
to thumb drives or external enclosures
Wiebetech Branding
2c85m76y
PMS 711C
66c7m7y
PMS 299C
Product Name:
Univers 73 Black Extended
abcdefghijklmnopqrstuvwxyz
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Ditto is a registered trademark of CRU Acquisitions Group, LLC. Other marks are the property of their
respective owners. © 2013 CRU Acquisitions Group, LLC. All rights reserved.
Limited Product Warranty
CRU-DataPort (CRU) warrants this product to be free of significant defects in material and workman-
ship for a period of three years from the original date of purchase. CRU’s warranty is nontransferable
and is limited to the original purchaser.
Limitation of Liability
The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims all
other warranties, including but not limited to, the implied warranties of merchantability and fitness
for a particular purpose and non-infringement of third-party rights with respect to the documentation
and hardware. No CRU dealer, agent or employee is authorized to make any modification, extension,
or addition to this warranty. In no event will CRU or its suppliers be liable for any costs of procurement
of substitute products or services, lost profits, loss of information or data, computer malfunction, or any
other special, indirect, consequential, or incidental damages arising in any way out of the sale of, use
of, or inability to use any CRU product or service, even if CRU has been advised of the possibility of
such damages. In no case shall CRU’s liability exceed the actual money paid for the products at issue.
CRU reserves the right to make modifications and additions to this product without notice or taking
on additional liability.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.”
This equipment has been tested and found to comply with the limits for a Class A digital device, pur-
suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his or her own expense.
In the event that you experience Radio Frequency Interference, you should take the following steps to
resolve the problem:
1.
Ensure that the case of your attached drive is grounded.
2. Use a data cable with RFI reducing ferrites on each end.
3. Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC
plug.
4. Reorient or relocate the receiving antenna
FOR OFFICE OR COMMERCIAL USE
A9-000-0028-2 Rev. 1.0
