background image

CRU 

 

U s e r  M a n u a l  f o r  R A X  Q R  ( A9-210-0009) REV 1.0 

  - 8 -       

 

7. Buzzer and Temperature Configuration 

 

If you would like to set a password for security, enable or disable audible alarms, or change the 
temperature thresholds for heat warnings and alarms, you may do so using a free software utility known 
as Configurator. To download the Configurator software and user manual, please visit 

http://www.wiebetech.com/software/configurator.php

.  WiebeTech is a brand of CRU.  

 

7.1 Configuration PIN 

This feature allows you to set a PIN to prevent unauthorized 
configuration.  The default PIN is 0000. RAX QR only requires 
you to enter a PIN if a different value has been set. 
 

7.2 Buzzers 

Place a check in the boxes to indicate which warning/alarm 
buzzers you want to be activated. 

 

7.3 System Warning Buzzer 

This buzzer will sound when a drive reaches a default 
temperature, or a temperature that you set (see section 6.7).  As 
a visual alert, the “system” LED will glow 

amber

 when the 

temperature is reached. 
 

7.4 System Alarm Buzzer 

This buzzer will sound on 3 occasions: 

  When a drive reaches a default temperature or temperature that you set (see section 7.7).  

  When the enclosure reaches a default temperature or temperature that you set (see section 7.7). 

  When the RAX fan fails.  

 
As a visual alert, the “system” LED on your RAX will glow 

red 

when any of these three situations occur. 

 

7.5 RAID Warning Buzzer 

This buzzer will sound when RAX QR is in degraded RAID mode (a drive has failed and is in need of 
rebuild or the RAID is rebuilding).  The “RAID” LED will glow 

amber 

if this occurs. 

 

7.6 RAID Alarm Buzzer 

This buzzer will sound when the RAID has failed or is invalid.  
The “RAID” LED will glow 

red

 if this occurs. 

 

7.7 Temperature Sliders 

When your RAX QR reaches a certain temperature, buzzers 
sound and the fan kicks on.  You may want to change these 
default temperatures according to your environment.  With these 
“sliders,” you can change the default temperatures of the:  

  Enclosure fan kick-on 

  Enclosure Temperature Alarm 

 Drive 

Temperature 

Warning 

  Drive Temperature Alarm 

 
 

Содержание 2-BAY 219-QR














Отзывы: