Thank you for purchasing this stainless steel cabinet. Please follow the fixing and care
instructions to ensure your cabinet is fitted safely and retains its high quality finish.
Please retain
this leaflet for future reference.
This instruction leaflet applies to the following products:
WC450505 – Dart Square Door Mirror Stainless Steel Cabinet
Fixing Pack Contents
(a) Mounting Screws
(b) Wall Plugs
Fixing pack contents will vary depending on the individual design of the cabinet.
Tools Required
Drill; 6.5mm masonry drill bit (6.5mm ceramic drill bit optional); Cross-head screwdriver; Pencil;
Spirit level
KEEP DIY TOOLS OUT OF THE REACH OF CHILDREN
Home Safety Advice
It is recommended that two people fit the cabinet to ensure that it is fitted safely.
Always take care when using an electric drill, particularly in the bathroom. Always check for
hidden cables and pipe work before drilling and take extreme care if there is any water in the
working area.
It is advisable to use a residual current circuit breaker (RCCB).
Always wear suitable eye protection when drilling.
If the product is to be fitted on a ceramic tiled wall, a ceramic drill bit should be used. Always
ensure that the drill hole passes through the central tiled area rather than through the grouted
area. To prevent unnecessary damage to the tile, mask the area around the hole with tape
before drilling.
Do not strike the product with hard or sharp objects. Do not place hot objects against the glass
surfaces.
Do not overload the cabinet. Maximum safe working load is 10kg evenly distributed if mounted
on to a solid wall. If mounted on to a cavity wall reduce the load to 5kg evenly distributed.
Note: The wall plugs supplied are for use on solid walls only. For cavity walls or
plasterboard use specialist fixings that are available from all good DIY stores.
CAB 058 R01