background image

Obtaining Other Language Versions: 

To obtain information in another language about 

the use of this product, please contact your local Crown Distributor. If you need assistance 

locating your local distributor, please contact Crown at 574-294-8000.
This manual does not include all of the details of design, production, or variations of the 

equipment. Nor does it cover every possible situation which may arise during installation, 

operation or maintenance.
The information provided in this manual was deemed accurate as of the publication date. 

However, updates to this information may have occurred. To obtain the latest version of this 

manual, please visit the Crown website at www.crownaudio.com.

Trademark Notice:

 Crown, Crown Audio, and Amcron are registered trademarks of 

Crown International. Other trademarks are the property of their respective owners.  

Later versions of this manual and additional information about this product may be available 

at the Crown website at www.crownaudio.com.

Some models may be exported under the name Amcron

®

©2012 by Harman International, 1718 W. Mishawaka Rd., Elkhart, Indiana 46517-9439 

U.S.A. Telephone: 574-294-8000.

Models: XTi 1002, XTi 2002, XTi 4002, XTi 6002

XTi2 Series 

Operation Manual

5021481  -  6/12

Содержание XTi 1002

















Отзывы: