manualshive.com logo in svg

Crowcon I-Test, Руководство пользователя, Страница: 9 / 125

Поделиться
Скачать
Crowcon I-Test Скачать руководство пользователя страница 9

9

Smart bump

A smart bump will test that the gas monitor responds correctly to a specified level of test gas.

Gas is passed over/across the sensors and a predicted response is expected within a time window 

dependant on the sensor response time. 

The test is passed if the gas level indicated by the monitor is within pre-specified tolerance limits 

within this time window.

Calibration

I-Test can be configured to undertake the routine service calibration of a gas monitor. In this instance 

a calibration would be completed without a bump test being required.

I-Test is suitable for routine service calibration of monitors.

If a new sensor has been fitted to the monitor then Portables-Pro should be used to calibrate the 

monitor not I-Test, otherwise incorrect calibration may occur.

Calibration after bump fail

If any sensor fails a speedy bump or smart bump, I-Test can be configured to perform a ‘calibration 

after bump fail, immediately after the bump test failure.

Gas Monitor Field Configuration

During normal operation, whilst performing gas testing, I-Test can be configured to change aspects 

of the inserted gas monitor configuration, such as sensor alarm levels as well as other aspects of 

configuration.

Gas Monitor Log Download 

During normal operation I-Test can be configured to download either event logs and/or data logs 

from the monitor under test. These log files are stored locally and can be extracted either via PC or 

USB flash drive.

Data Management & Reporting

I-Test in conjunction with its PC Application, I-Test Manager, can be utilised for full data management 

of the bump test and calibration data. 

I-Test Manager allows the user to specify exception reports to quickly identify instruments, for 

example, that have not been bump tested or failed bump test. I-Test Manager will also allow a user 

to upload and view monitor log files from the I-Test. Bump test and calibration reports can also be 

created, printed and stored.

Contents

Exit

Unpacking

Set-up

Operating I-Test

I-Test 

Manager

Configuring 

I-Test

Warranty

Overview

Contacts

Appendices

Troubleshooting

Specification

Содержание I-Test






























































































































Отзывы:

Нет отзывов