Crowcon Detective Net Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 40

Crowcon Detective Net Скачать руководство пользователя страница 28

28

1.8.3 Modulated Alert

A Modulated Alert is a response of Detective Net to a local problem with the Detective Net device. It

is not a response to a command via the wireless network.

For example if a slave Detective Net device has lost connection to the network a modulated alert will

be sent to the locally-attached De. This will cause the De to go into Modulated Alert,

the beacon and lights will flash for 3 seconds followed by a 5 second pause; this pattern will then be

repeated. This modulated alert is to signify a difference to the Gas Alarm or Network Alert.

The following conditions can cause a Modulated Alert to be instigated:

• A slave device losing network connection to a master device (see

Section 1.9.2

• A Detective Net device detects a low internal battery (see

Section 1.9.4

)

• A Detective Net device detecting an internal fault (see

Section 1.9.6

)

i

A Detective Net device in Modulated Alert signifies a fault with either the network or the

Detective Net device and should be investigated and rectified immediately to ensure the

wireless network continues to function as desired.

Contents

Exit

Overview

Operation

Specification

Service and

maintenance

Troubleshooting

Warranty

Glossary

Contacts

Accessories

«
...
26
27
28
29
30
...
»

Содержание Detective Net









































Отзывы:

Нет отзывов