The PANIC Key
This special key's function is best programmed by your installer to suit your
individual situation. Most commonly it is used in a panic situation to sound
only the outside siren and perhaps call a monitoring station. A panic
command can be instant or require a 3 second delay to prevent false alarm.
With the optional voice board it can be programmed to call your spouse,
friends or a trusted neighbours with a message from you requesting help.
(A
Panic
can also be triggered by a dedicated Monitor Mode Keypad or a
Remote Control button programmed as instant or delayed panic).
The CONTROL Key
Another special function key that can be programmed to control a single
function. Toggle on or off by pressing the
[CONTROL]
key (Control LED will
illuminate). This key is often used to enable a
Chime-zone
, (a detector that
can be part armed while you are home but working in another part of the
building).
In this mode it can be programmed to operate a buzzer to let you know you
have a visitor. When the system is fully armed it changes to become a full
alarm zone.
In addition, enter your 4 digit
Telephone Control
code and any of the 5 on
board outputs can be operated, if programmed to do so, by pressing the
number key that matches the output, toggling on or off. (Zone LED's on the
keypad will indicate status of each output).
The STAY Key
‘Stay’ mode allows you to monitor the parts of the house you will not be in
at night, to enable you to feel more secure at home. Pre-selected zones or
sensors in areas you or your family will not be, can be armed with this key
while you are in the building and programmed to go into your choice of
alarm states if triggered. As with everything else on the panel this too can
be tailored to your needs. For example you may wish to have the detectors
in your garage and lounge sound only the little buzzer in the keypad by your
bed at night to warn you of an intruder while silently dialling for assistance.
To use this feature press the
[STAY]
key and the exit delay will sound.
The armed light on the keypad will flash.
To disarm, press the
[STAY]
key again. The PW-16 can be
USER CODES:
1.
Code__________
Name_____________________
2.
Code__________
Name_____________________
3.
Code__________
Name_____________________
4.
Code__________
Name_____________________
5.
Code__________
Name_____________________
6.
Code__________
Name_____________________
7.
Code__________
Name_____________________
8.
Code__________
Name_____________________
9.
Code__________
Name_____________________
10.
Code__________
Name_____________________
11.
Code__________
Name_____________________
12.
Code__________
Name_____________________
13.
Code__________
Name_____________________
14.
Code__________
Name_____________________
15.
Code__________
Name_____________________
16.
Code__________
Name_____________________
17.
Code__________
Name_____________________
18.
Code__________
Name_____________________
19.
Code__________
Name_____________________
20.
Code__________
Name_____________________
21.
Code__________
Name_____________________
22.
Code__________
Name_____________________
23.
Code__________
Name_____________________
24.
Code__________
Name_____________________
