background image

About your Alarm Controller

 

 
Thank you for choosing to protect your premises with a 

PowerWave -16 

(PW-16)

. In doing so you have invested in the most advanced and 

adaptable panel on the market.  
 
As you become familiar with your PW-16, 

ask your installer 

about the 

incredible program options and additional expandability of your PW-16 
Alarm Controller. 
 
Your new panel in standard trim is ready to give you years of trouble free 
operation and can be custom programmed to your specific needs. "But wait 
there's more". 

Home Automation 

 

The PW-16 is ready when you are to utilise the outputs on the panel. These 
can be used in conjunction with the real-time clock or the keypad to 

[CONTROL]

 outdoor lighting, water heating or even your doors for access 

control. 
 
Add on features like the 

RX-40

 wireless receiver card to operate any of the 

8 outputs and the arm / disarm of your panel with up to 24 Remote 
Controls. 
 
Make use of the unique 

Voice Board 

option and open up a whole new level 

of flexibility with 

Telephone Control

.  

 
In basic trim your panel is ready to communicate with monitoring stations 
and call you at work on your cell phone or pager generating alarm tones. 
  
Add the 

Voice Board

 and your panel will call you with alarm messages in 

your own voice. 
 
You can phone your home to check or change the status of any output 
using the keys on your phone.  
Arm or disarm the whole house or just one area, all with your own voice 
confirming your selections.  
 
Imagine turning on the spa before leaving work so it is hot when you get in 
the door. The under-floor heating has just automatically switched on using 
the on board timer and you have just opened the rollerdoor and disarmed 
the garage from your cell phone so the white ware repairman can work on 
your washer. 

 

Telephone Control: 

operating instructions: 

OUTPUTS: 

 
 
Output 1 _____________________ 

Output 2 _____________________ 

Output 3 _____________________ 

Output 4 _____________________ 

Output 5 _____________________ 

Output 6 _____________________ 

Output 7 _____________________ 

Output 8 _____________________ 
 
 
Siren Time:   ____  (minutes) 
 
 
 
 

COMMUNICATION OPTIONS: 

 
Monitoring   

 

Domestic 

 

 

Speech 

 
 
 

SERVICING: 

 
Can your system be serviced by another technician? 
 
If yes, Installer Code __________

 

Содержание Power Wave-16







Отзывы: