background image

Installation Instructions

60”

15

-3/4'

2

"

 dia

31

-1/2"

15

-3/4"

20

-1/2"

22

-1/4"

45

"

2

-1/4"

Tape

measure

Safety

glasses

Set

square

Pencil

Spirit

level

Silicone

sealant

Tools required

Weight - 205lbs

Weight with water - 656lbs

Installation notes

The installation must comply with all plumbing codes including local 

codes and be installed by a licensed plumbing contractor.
Store the bathtub in a safe place until you begin installation to avoid 

any damage.
Assemble the bathtub on a mat to protect against damage to the bath 

tub surface.
Avoid getting cement, grit, sand or masonry products on to the surface.

 

Protect and cover the bathtub during the installation period to prevent 
damage from occurring.

Never use brown tape or gaffer tape directly on to the surface. If the 
bath has to be repacked remember to avoid taping directly on to the 
surface of the bathtub.

IMPORTANT

T

urn off the main water supply before connecting to 

any existing pipework or doing any maintenance.
WARNING! Please check for any hidden pipes and cables, electric 

or otherwise

,

 before drilling holes in a wall or floor.

Dimensions

Introduction

This bathtub has been fully inspected throughout the production 
process and only leaves our factory after a 15

-

s

tep

 QC process.

Don’t remove the old fixture before you unpack and inspect the new 
bathtub.

Carefully remove the bat

h

tub from the box, taking care the bathtub is 

carried in the bag and check that all parts have been supplied.

 

Before 

beginning installation of the bathtub please check for any damage 
that may have occurred during transport.

 

Note: Damage claims 

cannot be made during or after installation. 

Improper installation shall result in loss of warranty in case of damage 
caused by impacts or rubbing against rough surfaces.
Prior to installing the bathtub prepare a connection of water inlet/outlet.

 

Pay attention to leveling of floor where the bath

t

ub will be located, 

ensuring it can take the weight of the bathtub

water

 and bather(s)

.

 

The customer may choose the type and location of the faucets, 
installation instructions should be supplied by the faucet manufacturer.

 

The installation procedure of the bathtub may differ from that 
described in the installation instructions, depending on where you 
wish the bathtub to be located.
Wet surface of the bathtub may create a risk of slipping which may 
increase by using soap, shampoo, oils and similar products.

 

IMPORTANT: Please read these instructions carefully before you 
begin and retain for future reference.
We do not accept responsibility for any problems that may occur 
through incorrect installation.
RECOMMENDATIONS:

 

-

W

alls and floor 

should be

 fully tiled and finished before installation

T

his ensures that the product is installed flat to the tile face and allows 

the 

product to be easily removed if required in the future.

-

R

emove the protective packaging after installation of the bathtub.

-

O

nly fill the bathtub with water up to 2/3 of  its height.

-

U

se 

US-CW12

 

and 

ITD5135 

waste flow products with this bathtub.

Vicenza Petite

 

Bathtub

US-N6DCS

2/3 Height = 54 Gal./205L

Отзывы: