Installation Instructions
Tape
measure
Safety
glasses
Adjustable
wrench
Flat head
screwdriver
8mm
drill
Pencil
Spirit
level
Silicone
sealant
Tools required
x4
x4
x4
x4
x8
x4
x4
x4
x4
x8
x1
Parts supplied
Installation notes
The installation must comply with all plumbing codes including local
codes and be installed by a licensed plumbing contractor.
Assemble
the
bath
tub on a mat to protect against damage to the tub surface.
Note: Batht
ub diagrams shown are for reference only.
WARNING! Please check for any hidden pipes and cables, electric
or otherwise
,
before drilling holes in a wall or floor.
Introduction
The claw feet have been fully inspected throughout the production
process and only leaves our factory after a 15
-step
QC process.
Carefully remove the claw feet from the box and check that all parts
have been supplied.
Before beginning installation
, p
lease check for any damage that may
have occurred during transport.
Note: Damage claims cannot be made during or after
installation.
Improper installation shall result in loss of warranty in case of
damage caused by impacts or rubbing against rough surfaces.
IMPORTANT: Please read these instructions carefully before
b
egin
ning
and retain for future reference.
We do not accept responsibility for any problems that may occur
through incorrect installation.
Claw Bathtub Feet
US-L1
